Original Tombstone
You can see the ragged edges that will need to be sanded down.
Web templates when you need them...
This technique can be used on any purchased, inexpensive foam tombstones.
You can see the ragged edges that will need to be sanded down.
This images shows how much needs to be sanded down on the sides and top.
Trace the stone on foam and cut it out. I used the Hotwire Hot Knife to cut the foam. Leave 2-4 inches at the bottom to add the base. Since I am using 2 inch foam, I am leaving 4 inches at the bottom.
Glue the foam pieces together after you insert the pvc pipe in the foam.
